Kubernetes

StackState Self-hosted v4.6.x

This page describes StackState version 4.6.

Go to the documentation for the latest StackState release.

Overview

StackState Agent V2

To retrieve topology, events and metrics data from a Kubernetes cluster, you will need to have the following installed in the cluster:

• StackState Agent V2 on each node in the cluster

• StackState Cluster Agent on one node

• kube-state-metrics

To integrate with other services, a separate instance of the StackState Agent should be deployed on a standalone VM.

StackState Agents

The Kubernetes integration collects topology data in a Kubernetes cluster, as well as metrics and events. To achieve this, different types of StackState Agent are used:

Component	Pod name
StackState Cluster Agent	stackstate-cluster-agent
StackState Agent	stackstate-cluster-agent-agent
StackState ClusterCheck Agent (optional)	stackstate-cluster-agent-clusterchecks

To integrate with other services, a separate instance of the StackState Agent should be deployed on a standalone VM. It is not currently possible to configure a StackState Agent deployed on a Kubernetes cluster with checks that integrate with other services.

StackState Agents on Kubernetes

StackState Cluster Agent

StackState Cluster Agent is deployed as a Deployment. There is one instance for the entire cluster:

• Topology and events data for all resources in the cluster are retrieved from the Kubernetes API

• Control plane metrics are retrieved from the Kubernetes API

When cluster checks are enabled, cluster checks configured here are run by the deployed StackState ClusterCheck Agent pod.

StackState Agent

StackState Agent V2 is deployed as a DaemonSet with one instance on each node in the cluster:

• Host information is retrieved from the Kubernetes API.

• Container information is collected from the Docker daemon.

• Metrics are retrieved from kubelet running on the node and also from kube-state-metrics if this is deployed on the same node.

By default, metrics are also retrieved from kube-state-metrics if that is deployed on the same node as the StackState Agent pod. This can cause issues on a large Kubernetes cluster. To avoid this, it is advisable to enable cluster checks so that metrics are gathered from kube-state-metrics by a dedicated StackState ClusterCheck Agent.

StackState ClusterCheck Agent (optional)

The StackState ClusterCheck Agent is an additional StackState Agent V2 pod that is deployed only when cluster checks are enabled in the Helm chart. When deployed, cluster checks configured on the StackState Cluster Agent will be run by the StackState ClusterCheck Agent pod.

On large Kubernetes clusters, you can run the kubernetes_state check on the ClusterCheck Agent. This check gathers metrics from kube-state-metrics and sends them to StackState. The ClusterCheck Agent is also useful to run checks that do not need to run on a specific node and monitor non-containerized workloads such as:

• Out-of-cluster datastores and endpoints (for example, RDS or CloudSQL).

• Load-balanced cluster services (for example, Kubernetes services).

The AWS check can be configured to run as a cluster check.

Setup

Supported versions

StackState Agent v2.16.0 is supported to monitor the following versions of Kubernetes:

• Kubernetes 1.16 - 1.21

• EKS (with Kubernetes 1.16 - 1.21)

• Default networking

• Container runtime:

  • Docker

  • containerd

  • CRI-O

StackState Receiver API address

StackState Agent connects to the StackState Receiver API at the specified StackState Receiver API address. The correct address to use is specific to your installation of StackState.

Install

The StackState Agent, Cluster Agent and kube-state-metrics can be installed together using the Cluster Agent Helm Chart:

1. If you do not already have it, you will need to add the StackState helm repository to the local helm client:

    helm repo add stackstate https://helm.stackstate.io
    helm repo update

2. Deploy the StackState Agent, Cluster Agent and kube-state-metrics with the helm command provided in the StackState UI after you have installed the StackPack. Additional variables can be added to the standard helm command, for example:

   • It is recommended to provide a stackstate.cluster.authToken.

   • For large Kubernetes clusters, enable cluster checks to run the kubernetes_state check in a StackState ClusterCheck Agent pod.

   • If you use a custom socket path, set the agent.containerRuntime.customSocketPath.

   • Details of all available helm chart values can be found in the Cluster Agent Helm Chart documentation (github.com).

Helm chart values

Details of all available helm chart values can be found in the Cluster Agent Helm Chart documentation (github.com).

stackstate.cluster.authToken

It is recommended to provide a stackstate.cluster.authToken in addition to the standard helm chart variables when the StackState Agent is deployed. This is an optional variable, however, if not provided a new, random value will be generated each time a helm upgrade is performed. This could leave some pods in the cluster with an incorrect configuration.

For example:

helm upgrade --install \
--namespace stackstate \
--create-namespace \
--set-string 'stackstate.apiKey=<your-api-key>' \
--set-string 'stackstate.cluster.name=<your-cluster-name>' \
--set-string 'stackstate.cluster.authToken=<your-cluster-token>' \
--set-string 'stackstate.url=<stackstate-receiver-api-address>' \
stackstate-cluster-agent stackstate/cluster-agent

agent.containerRuntime.customSocketPath

It is not necessary to configure this property if your cluster uses one of the default socket paths (/var/run/docker.sock, /var/run/containerd/containerd.sock or /var/run/crio/crio.sock)

If your cluster uses a custom socket path, you can provide it using the key agent.containerRuntime.customSocketPath. For example:

helm upgrade --install \
--namespace stackstate \
--create-namespace \
--set-string 'stackstate.apiKey'='{{config.apiKey}}' \
--set-string 'stackstate.cluster.name'='{{configurationConfig.kubernetes_cluster_name}}' \
--set-string 'stackstate.url'='{{config.baseUrl}}/stsAgent' \
--set-string 'agent.containerRuntime.customSocketPath'='<your-custom-socket-path>' \
stackstate-cluster-agent stackstate/cluster-agent

Upgrade

To upgrade the Agents running in your Kubernetes cluster, run the helm upgrade command provided on the StackState UI StackPacks > Integrations > Kubernetes screen. This is the same command used to deploy the StackState Agent and Cluster Agent.

Configure

Enable cluster checks

Optionally, the chart can be configured to start an additional StackState Agent V2 pod as a StackState ClusterCheck Agent pod. Cluster checks that are configured on the StackState Cluster Agent will then be run by the deployed StackState ClusterCheck Agent pod.

To enable cluster checks and deploy the ClusterCheck Agent pod, create a values.yaml file to deploy the cluster-agent Helm chart and add the following YAML segment:

clusterChecks:
  enabled: true

The following integrations have checks that can be configured to run as cluster checks:

• Kubernetes integration - Kubernetes_state check as a cluster check.

• OpenShift integration - OpenShift Kubernetes_state check as a cluster check.

• AWS integration - AWS check as a cluster check.

Advanced Agent configuration

StackState Agent V2 can be configured to reduce data production, tune the process blacklist, or turn off specific features when not needed. The required settings are described in detail on the page advanced Agent configuration.

Integration configuration

To integrate with other external services, a separate instance of the StackState Agent should be deployed on a standalone VM. It is not currently possible to configure a StackState Agent deployed on a Kubernetes cluster with checks that integrate with other services.

Commands

Agent and Cluster Agent pod status

To check the status of the Kubernetes integration, check that the StackState Cluster Agent (cluster-agent) pod and all of the StackState Agent (cluster-agent-agent) pods have status READY.

❯ kubectl get deployment,daemonset --namespace stackstate

NAME                                                 READY   UP-TO-DATE   AVAILABLE   AGE
deployment.apps/stackstate-cluster-agent             1/1     1            1           5h14m
NAME                                                 DESIRED   CURRENT   READY   UP-TO-DATE   AVAILABLE   NODE SELECTOR   AGE
daemonset.apps/stackstate-cluster-agent-agent        10        10        10      10           10          <none>          5h14m

Agent check status

To find the status of an Agent check:

1. Find the Agent pod that is running on the node where you would like to find a check status:

   kubectl get pod --output wide

2. Run the command:

   kubectl exec <agent-pod-name> -n <agent-namespace> -- agent status

3. Look for the check name under the Checks section.

Uninstall

To uninstall the StackState Cluster Agent and the StackState Agent from your Kubernetes cluster, run a Helm uninstall:

helm uninstall <release_name> --namespace <namespace>

# If you used the standard install command provided when you installed the StackPack
helm uninstall stackstate-cluster-agent --namespace stackstate

See also

• Cluster Agent Helm Chart documentation (github.com)

• About the StackState Agent

• Advanced Agent configuration

• Kubernetes StackPack