KeyCloak

StackState Self-hosted v4.5.x

This page describes StackState v4.5.x. The StackState 4.5 version range is End of Life (EOL) and no longer supported. We encourage customers still running the 4.5 version range to upgrade to a more recent release.

Go to the documentation for the latest StackState release.

Overview

StackState can authenticate using KeyCloak as an authentication provider, you will need to configure both StackState and KeyCloak to be able to talk to each other. The following sections describe the respective setups.

Configure KeyCloak

Before you can configure StackState to authenticate using KeyCloak, you need to add a new client configuration to the KeyCloak Authentication Server. The necessary settings for the client are:

  • Client ID - The ID of the client that is connecting, we recommend naming this stackstate

  • Client Protocol - Set to openid-connect

  • Access Type - Set to confidential, so that a secret is used to establish the connection between KeyCloak and StackState

  • Standard Flow Enabled - Set to Enabled

  • Implicit Flow Enabled - Set to Disabled

  • Root URL - The root location of StackState (the same value configured in as base URL of the StackState configuration

  • Valid redirect URIs - This should be /loginCallback/*

  • Base URL - This should point to the root location of StackState

Configure StackState

Kubernetes

To configure StackState to authenticate using KeyCloak, KeyCloak details and user role mapping needs to be added to the file authentication.yaml. For example:

stackstate:
  authentication:
    keycloak:
      url: "https://keycloak.acme.com/auth"
      realm: acme
      authenticationMethod: client_secret_basic
      clientId: stackstate
      secret: "8051a2e4-e367-4631-a0f5-98fc9cdc564d"
      jwsAlgorithm: RS256
      # jwtClaims:
      #   usernameField: preferred_username
      #   groupsField: roles

    # map the roles from Keycloak to the
    # 4 standard subjects in StackState (guest, powerUser, admin and platformAdmin)
    roles:
      guest: ["keycloak-guest-role-for-stackstate"]
      powerUser: ["keycloak-power-user-role-for-stackstate"]
      admin: ["keycloak-admin-role-for-stackstate"]
      platformAdmin: ["keycloak-platformadmin-role-for-stackstate"]

Follow the steps below to configure StackState to authenticate using KeyCloak:

  1. In authentication.yaml - add details of the KeyCloak authentication provider (see the example above). The KeyCloak specific values can be obtained from the client configuration in KeyCloak:

    • url - The base URI for the KeyCloak instance

    • realm - The KeyCloak realm to connect to

    • authenticationMethod - Set to client_secret_basic, this is currently the only supported value.

    • clientId - The ID of the KeyCloak client as configured in KeyCloak

    • secret - The secret attached to the KeyCloak client, which is used to authenticate this client to KeyCloak

    • redirectUri - Optional: The URI where the login callback endpoint of StackState is reachable. Populated by default using the stackstate.baseUrl, but can be overridden (must be a fully qualified URL that points to the /loginCallback path)

    • jwsAlgorithm - Set this to RS256, this is currently the only supported value.

    • jwtClaims - Optional: The roles or username can be retrieved from a different attribute than the Keycloak default behavior

      • usernameField - Optional: The field in the OIDC user profile that should be used as the username. By default this will be the preferred_username.

      • groupsField - Optional: StackState will always, and by default only, use the roles Keycloak provides. But it can also add roles from the field specified here. This is mainly useful when Keycloak is mapping roles/groups from a third-party system.

  2. In authentication.yaml - map user roles from KeyCloak to the correct StackState subjects using the roles.guest, roles.powerUser, roles.platformAdmin or roles.admin settings (see the example above). For details, see the default StackState roles. More StackState roles can also be created, see the RBAC documentation.

  3. Store the file authentication.yaml together with the values.yaml file from the StackState installation instructions.

  4. Run a Helm upgrade to apply the changes:

     helm upgrade \
       --install \
       --namespace stackstate \
       --values values.yaml \
       --values authentication.yaml \
     stackstate \
     stackstate/stackstate

Note:

  • The first run of the helm upgrade command will result in pods restarting, which may cause a short interruption of availability.

  • Include authentication.yaml on every helm upgrade run.

  • The authentication configuration is stored as a Kubernetes secret.

Linux

To configure StackState to use a KeyCloak authentication provider on Linux, KeyCloak details and user role mapping needs to be added to the file application_stackstate.conf. This should replace the existing authentication section that is nested in stackstate.api. For example:

authorization {
  // map the roles from Keycloak to the
  // 4 standard subjects in StackState (guest, powerUser, admin and platformAdmin)
  // Please note! you have to use the syntax
  // `<group>Groups = ${stackstate.authorization.<group>Groups} ["keycloak-role"]`
  // to extend the list of standard roles (stackstate-admin, stackstate-platform-admin, stackstate-guest, stackstate-power-user)
  // with the ones from Keycloak
  guestGroups = ${stackstate.authorization.guestGroups} ["keycloak-guest-role-for-stackstate"]
  powerUserGroups = ${stackstate.authorization.powerUserGroups} ["keycloak-power-user-role-for-stackstate"]
  adminGroups = ${stackstate.authorization.adminGroups} ["keycloak-admin-role-for-stackstate"]  
  platformAdminGroups = ${stackstate.authorization.platformAdminGroups} ["keycloak-platform-admin-role-for-stackstate"]  
}

authentication {
  authServer {
    authServerType = [ "keycloakAuthServer" ]

    keycloakAuthServer {
      clientId = stackstate
      secret = "8051a2e4-e367-4631-a0f5-98fc9cdc564d"
      keycloakBaseUri = "https://keycloak.acme.com/auth"
      realm = acme
      redirectUri = "https://stackstate.acme.com/loginCallback"
      authenticationMethod = "client_secret_basic"
      jwsAlgorithm = "RS256"
    }
  }
}

Follow the steps below to configure StackState to authenticate using KeyCloak:

  1. In application_stackstate.conf - add details of the KeyCloak authentication provider (see the example above). This should replace the existing authentication section that is nested in stackstate.api. The KeyCloak specific values can be obtained from the client configuration in KeyCloak:

    • clientId - The ID of the KeyCloak client as configured in KeyCloak.

    • secret - The secret attached to the KeyCloak client, which is used to authenticate this client to KeyCloak.

    • keycloakBaseUri - The base URI for the KeyCloak instance.

    • realm - The KeyCloak realm to connect to.

    • redirectUri - The URI where the login callback endpoint of StackState is reachable (must be a fully qualified URL that points to the /loginCallback path).

    • authenticationMethod - Set this to client_secret_basic which is the only supported value for now.

    • jwsAlgorithm - Set this to RS256, which is the only supported value for now.

    • jwtClaims - Optional (not in example): The roles or username can be retrieved from a different attribute than the Keycloak default behavior.

      -. usernameField - Optional: The field in the OIDC user profile that should be used as the username. By default this will be the preferred_username.

      • groupsField - Optional: StackState will always, and by default only, use the roles Keycloak provides. But it can also add roles from the field specified here. This is mainly useful when Keycloak is mapping roles/groups from a third-party system.

  2. In application_stackstate.conf - map user roles from KeyCloak to the correct StackState subjects using the guestGroups, powerUserGroups, adminGroups or platformAdminGroups settings (see the example above). For details, see the default StackState roles. More StackState roles can also be created, see the RBAC documentation.

  3. Restart StackState to apply the changes.

See also

Last updated