Dynatrace

Search…
Dynatrace
Collect Smartscape topology data from Dynatrace
This page describes StackState version 4.1. 
The StackState 4.1 version range is End of Life (EOL) and no longer supported. We encourage customers still running the 4.1 version range to upgrade to a more recent release.
Go to the documentation for the latest StackState release.
Overview
The Dynatrace StackPack creates a synchronization between a Dynatrace instance and StackState. When the integration is enabled, Dynatrace Smartscape topology from the last 72 hours will be added to the topology in StackState.
Data flow
Agent V2 connects to the configured Dynatrace API to retrieve Smartscape topology data from the last 72 hours.
Agent V2 pushes retrieved data to StackState.
StackState translates incoming Dynatrace data into topology components and relations. 
Setup
Pre-requisites
To set up the Dynatrace integration you will need to have:
​StackState Agent V2 installed on a machine that can connect to both Dynatrace and StackState.
A running Dynatrace instance.
A Dynatrace API Token with access to read the Smartscape Topology, see REST API endpoints.
Install
Install the Dynatrace StackPack from the StackState UI StackPacks > Integrations screen. You will need to provide the following parameters:
Dynatrace URL - the Dynatrace URL from which topology will be collected. 
Dynatrace Instance Name - the user-defined name of the Dynatrace account shown in configurations such as views. 
Configure
To enable the Dynatrace check and begin collecting data from Dynatrace, add the following configuration to StackState Agent V2:
1.Edit the Agent integration configuration file /etc/sts-agent/conf.d/dynatrace_topology.d/conf.yaml to include details of your Dynatrace instance:
url - the URL of the Dynatrace instance.
token - an API token with access to the required Dynatrace API endpoints.
1
# Section used for global dynatrace check config
2
init_config:
3
​
4
instances:
5
# mandatory
6
- url: <url> # URL of the Dynatrace instance
7
  token: <token> # API-Token to connect to Dynatrace
8
  # verify: True  # By default its True
9
  # cert: /path/to/cert.pem
10
  # keyfile: /path/to/key.pem
11
  # domain: <domain>  # default 'dynatrace'
12
  # environment: <environment>    # default 'production'
13
  # tags:
14
  #   - foo:bar
Copied!
2.Optional: Add a domain and environment in the conf.yaml file to specify where imported Dynatrace topology will end up in StackState (default domain=dynatrace and environment=production).
3.​Restart the StackState Agent(s) to apply the configuration changes.
4.Once the Agent has restarted, wait for data to be collected from Dynatrace and sent to StackState.
Status
To check the status of the Dynatrace integration, run the status subcommand and look for Dynatrace under Running Checks:
1
sudo stackstate-agent status
Copied!
Integration details
REST API endpoints
The API Token configured in StackState Agent V2 must have the permission Access problems and event feed, metrics, and topology (API value DataExport), see Dynatrace API token permissions (dynatrace.com) for details. The API endpoints used in the StackState integration are listed below:
/api/v1/entity/applications
/api/v1/entity/infrastructure/hosts
/api/v1/entity/infrastructure/processes
/api/v1/entity/infrastructure/process-groups
/api/v1/entity/services
Refer to the Dynatrace documentation for details on how to create an API Token.
Data retrieved
Events
The Dynatrace check does not retrieve any events data.
Metrics
The Dynatrace check does not retrieve any metrics data.
Topology
The Dynatrace check retrieves the following topology data from Dynatrace:
Data
Description
Components
Smartscape Applications, Hosts, Processes, Process-Groups and Services from the last 72 hours.
Relations
Relations between the imported components are included in the component data retrieved from Dynatrace.
Traces
The Dynatrace check does not retrieve any traces data.
Dynatrace filters for StackState views
When the Dynatrace integration is enabled, the following additional keys can be used to filter views in the StackState UI:
dynatrace-ManagementZones
dynatrace-EntityID
dynatrace-Tags
dynatrace-MonitoringState
For example, to filter a view by Dynatrace Management Zone, add the key dynatrace-managementZones:<value> to the Labels filter box.
Use a Dynatrace topology filter
Open source
The code for the Dynatrace check is open source and available on GitHub at: https://github.com/StackVista/stackstate-agent-integrations/tree/master/dynatrace_topology​
Troubleshooting
Troubleshooting steps for any known issues can be found in the StackState support Knowledge base.
Uninstall
To uninstall the Dynatrace StackPack and disable the Dynatrace check:
1.Go to the StackState UI StackPacks > Integrations > Dynatrace screen and click UNINSTALL.
All Dynatrace specific configuration will be removed from StackState.
2.Remove or rename the Agent integration configuration file, for example:
1
 mv dynatrace.d/conf.yaml dynatrace.d/conf.yaml.bak
Copied!
3.​Restart the StackState Agent(s) to apply the configuration changes.
See also
​StackState Agent V2​
​StackState Agent integrations - Dynatrace (github.com)​
​How to generate a Dynatrace API token (dynatrace.com)​
​Permissions for Dynatrace API tokens (dynatrace.com)​