v5.1
StackState.com Download Support Explore playground

Debug health synchronization

StackState Self-hosted v5.1.x

Overview

The StackState CLI can be used to troubleshoot a health synchronization and fix issues that might prevent health data from being correctly ingested and displayed in StackState. This page describes the general troubleshooting steps to take when debugging a health synchronization, as well as the CLI commands used, and a description of the error messages returned.

General troubleshooting steps

When debugging the health synchronization there are some common verification steps that can be made no matter what the specific issue is:

  1. Verify that the stream exists.

  2. If you are using sub streams, verify that the substream exists. The response will also show the number of check states on the substream. This lets you know if the data is being ingested and processed.

  3. Investigate further:

    • Stream present - Check the stream status, this will show the metrics latency of the stream and any errors.

    • Streams / sub streams present, but there are no check states - Confirm that the payload sent to the Receiver API adheres to the health payload specification.

    • No streams / sub streams are present - Use the CLI command below to verify that health data sent to the Receiver API is arriving in StackState:

From StackState v5.0, the old sts CLI has been renamed to stac and there is a new sts CLI. The command(s) provided here are for use with the new sts CLI.

➡️ Check which version of the sts CLI you are running

$ sts topic describe --name sts_health_sync

Common issues

Check state not visible on the component

There can be two reasons for a check state not to show on a component in StackState:

  • The health check state hasn't been created. Follow the general troubleshooting steps to confirm that the stream / substream has been created and that data is arriving in StackState.

  • The health check state was created, but its topologyElementIdentifier doesn't match any identifiers from the StackState topology. Use the CLI command show substream status to verify if there are any Check states with identifier which has no matching topology element.

Check state slow to update in StackState

The main reason for this is that the latency of the health synchronization is higher than expected. Use the CLI command show stream status to confirm the latency of the stream as well as the throughput of messages and specific check operations. It may be necessary to tweak the data sent to the health synchronization, or the frequency with which data is sent.

Useful CLI commands

List streams

Returns a list of all current synchronized health streams and the number of sub streams included in each.

From StackState v5.0, the old sts CLI has been renamed to stac and there is a new sts CLI. The command(s) provided here are for use with the new sts CLI.

➡️ Check which version of the sts CLI you are running

$ sts health list
STREAM URN                                              | STREAM CONSISTENCY MODEL | SUB STREAM COUNT
urn:health:sourceId:streamId                            | REPEAT_SNAPSHOTS         | 1

List sub streams

Returns a list of all sub streams for a given stream URN, together with the number of check states in each.

From StackState v5.0, the old sts CLI has been renamed to stac and there is a new sts CLI. The command(s) provided here are for use with the new sts CLI.

➡️ Check which version of the sts CLI you are running

$ sts health list -u urn:health:sourceId:streamId
SUB STREAM ID  | CHECK STATE COUNT
subStreamId1   | 1
subStreamId2   | 1

Show stream status

The stream status command returns the aggregated stream latency and throughput metrics. This is helpful when debugging why a health check takes a long time to land on the expected topology elements. It will help diagnose if the frequency of data sent to StackState should be adjusted. The output includes a section Errors for non-existing sub streams: as some errors are only relevant when a substream couldn't be created, for example StreamMissingSubStream. Substream errors can be any of the documented error messages.

From StackState v5.0, the old sts CLI has been renamed to stac and there is a new sts CLI. The command(s) provided here are for use with the new sts CLI.

➡️ Check which version of the sts CLI you are running

$ sts health status -u urn:health:sourceId:streamId

Show substream status

The substream status provides useful information to verify that StackState could bind check states sent from an external system to existing topology elements. This information is helpful to debug why a specific check isn't visible on the expected topology element.

From StackState v5.0, the old sts CLI has been renamed to stac and there is a new sts CLI. The command(s) provided here are for use with the new sts CLI.

➡️ Check which version of the sts CLI you are running

$ sts health status -u urn:health:sourceId:streamId -sub-stream-urn subStreamId3

A substream status will show the metadata related to the consistency model:

  • Repeat Snapshots - Show repeat interval and expiry

  • Repeat States - Show repeat interval and expiry

  • Transactional Increments - Show checkpoint offset and checkpoint batch index

The substream status can be expanded to include details of matched and unmatched check states using the -t command line argument. This is helpful to identify any health states that aren't attached to a topology element. In the example below, checkStateId2 is listed under Check states with identifier which has no matching topology element. This means that it was not possible to match the check state to a topology element with the identifier server-2.

From StackState v5.0, the old sts CLI has been renamed to stac and there is a new sts CLI. The command(s) provided here are for use with the new sts CLI.

➡️ Check which version of the sts CLI you are running

$ sts health status -u urn:health:sourceId:streamId -sub-stream-urn subStreamId3 -t

Delete a health stream

The delete stream functionality is helpful while setting up a health synchronization in StackState. You can use it to experiment, delete the data and start over again clean. You can also delete a stream and drop its data when you are sure that you don't want to keep using it.

From StackState v5.0, the old sts CLI has been renamed to stac and there is a new sts CLI. The command(s) provided here are for use with the new sts CLI.

➡️ Check which version of the sts CLI you are running

$ sts health delete -u urn:health:sourceId:streamId

Clear health stream errors

The clear-errors option removes all errors from a health stream. This is helpful while setting up a health synchronization in StackState, or, for the case of the TRANSACTIONAL_INCREMENTS consistency model, when some errors can't be removed organically. For example, a request to delete a check state might raise an error if the check state isn't known to StackState. The only way to suppress such an error would be to use the clear-errors command.

From StackState v5.0, the old sts CLI has been renamed to stac and there is a new sts CLI. The command(s) provided here are for use with the new sts CLI.

➡️ Check which version of the sts CLI you are running

$ sts health clear-error -u urn:health:sourceId:streamId

Error messages

Errors will be closed once the described issue has been remediated.

For example a SubStreamStopWithoutStart will be closed once the health synchronization observes a start snapshot message followed by a stop snapshot message.

See also

PreviousTransactional Increments JSONNextAnomaly Detection

Last updated

Logo

Legal notices

PrivacyCookiesResponsible disclosureSOC 2/SOC 3